Xbox360 Hacks - Xbox Hacking Community
You are not logged in.
Announcement
#1 0903.20 05:14:06
- RoOka55
- Xbox360 Noob
- Registered: 0803.21
- Posts: 18
Motherboard size
Hi. I would like to create a water cooling system for the 360, but I can't find any especially Xbox 360 heatsinks, so I decided to ask someone to create a custom heatsink.
I would like to ask someone, who knows, a question. I need the distance between the screw holes around the CPU and the GPU. There are 8 screw holes, I think that each chip has 4 holes that's distances are totally equal. Here's a link for a picture about the motherboard:
http://images.anandtech.com/reviews/gad … uctors.jpg
So, I need the distance of two screwholes that are around the CPU for example (the lower-left, and the upper left), and I need the distance between the 2 screwholes that are very close to each other. I hope that someone can help with this thing, I don't want to disassemble the 360, then assemble it again while those heatsinks will be ready.
Thank you very much for your help
Offline
#2 0903.20 07:26:08
- Powerslave
- Admin
- From: PGH, PA - Come get me!
- Registered: 0604.25
- Posts: 4454
- Website
Re: Motherboard size
There used to be a kit, probably still is, if you LOOK hard enough on-line, you will find the liquid-cooling system. No need for a custom made system. Also, you won't take your own system apart and measure it, so why are you asking other people to measure for you? That would mean someone has to open their system up, to measure it, well, I won't. That's unfair of you to say; "I don't want to disassemble the 360, then assemble it again while those heatsinks will be ready."; But it is ok for someone else to?
They also sell a PC Case for the XB360. You just are not looking around properly. These cooling kits and cases are ALL over the place dude.
Also, your subject says "Motherboard Size" when your detail asks something different.
Offline
-->