hi guys ive uploaded this
360 POT Calibration for Samsung and Hitachi tutorial
http://www.mediafire.com/?dqixonyjyx
POT stands for potentiometer, an apparatus that measures the potential (or voltage) which has a user-adjustable resistance. Usually, this is a three-terminal resistor with a sliding contact in the center. Basically, it tells the laser how bright to shine to resolve issues of the drive not reading media.

The potentiometers or pots are located in the laser head's side if you want to try and adjust them. Just be careful in adjusting them though, because it's known to kill some lasers. Most gamers suggest not going below 3.0 when adjusting your pots.

Thanks goto Moda from xbox-scene
for this tutorial

Thanks jay

Last edited by jay123_2 (0704.29 10:11:53)