So, I dumped the firmware on my Samsung MS25. However, when I flashed the drive it completed bank 1, but got stuck at bank 2. I waited a little bit, but no success.

I copied the patched firmware into the tools folder and ran:
MTKFLASH w /m /sata patched.bin

It sits at
Port: 10d8, Master/Slave: a0 (or something along the lines)
and nothing happens. When I press Esc, I get a message saying that the status = 80, but that it should be 70.
The drive doesn't even eject.

1) Does it matter whether I try to flash the original firmware or the patched firmware?
2) What's the timing I should follow? When I dumped the firmware, I only waited 2 seconds or so before turning on the drive and it worked right away.

Thank You