May 29, 2009iXtreme 1.6 0800 firmware BenQ, LiteOn, Samsung Team HyperX
Posted by The Ori
A 0800 (ripping version) of the 1.6 series has been released to the BenQ, LiteOn and Toshiba Samsung drives. As usual Hitachi will be last to follow (if at all supported for 0800 mode)
Features:
-Common API designed for easier application use!
-Support for SS V2!
-Direct 0800 mode for game dumping including SS v2!
This firmware is =NOT FOR USE IN A CONSOLE= and is provided
with the intended use of being in a dedicated “ripping” drive.
This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.
More Info
SS v2 supports multiple timing samples for challenges type 5 and 7, storing them in the SS. This is a pre-requisite for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.
ix16 0800 Commands
—————–
AD 00 FF 02 FD FF FE 00 08 00 00 C0 – SS/CPRMAI
AD 00 FF 02 FD FF FE 00 08 00 ID C0 – SS Challenge ID
12 00 00 00 30 C0 00 00 00 49 58 01 – ix Cmd 1 – Dumps key and rev 0×30 bytes
12 00 00 00 24 C0 00 xx xx 49 58 02 – ix Cmd 2 – Output 0×800 bytes from ram address
12 00 00 00 24 C0 00 00 00 49 58 03 – ix Cmd 3 – Toggles Lock/UnLock Game partition
Official Site: (n/a by Team HyperX)
Download: n/a (llegal under EULA/DMCA)
Very nice!
where can i download this from
so if i have 1.5 ixtreme now. dont use this to upgrade to because its for game dumping only? when will a update come out for console use?
The 1.6 fw for consoles was released a week ago.
http://www.xbox360-hacks.com/2009/05/17/team-hyperx-presents-ixtreme-16-firmware/
where can I get it?