September 1, 2008DVDKey32 Lite-On Key Retriever
Posted by The Ori
For what good it does for hacking the LiteOn drive now, you can get the Key from the LiteOn drive. You can, however, use the key to replace the drive with another drive OTHER than the LiteOn that can be hacked. It may result in a Live ban, but at least you have the option. IT would also be useful of a SPOOF patch was made for other drives for it to report as the LiteOn. This Key is only useful for something like that right now.
A Software/Hardware combination method has been discovered on how to extract your drivekey for a lite-on drive…
This exe is a win32 app that extracts the drive key from the Lite-On 360 drive via Serial.
Be warned: This win32 program does not use the windows API. The exe writes directly to the ATA controller’s I/O ports (which requires Geek Hideout’s I/O dll, which I have included in the rar). It also requires that you be using an ATA - SATA adapter to connect your 360 drive to your PC, or an SATA controller that has a legacy mode (try the BIOS setup options on your controller).
Geremia - initial concept
C4eva - the CDB’s and how to send them
Podger - for the code
Seventhson - for the userspace parallel ATA driver
*Please note that this is NOT a firmware hack for a lite-on drive. It is just a way to retrieve the key from the drive for use with another drive (samsung, hitachi, benq) that is capable of being modified.
This release is a revision of the original DVDKey released by Geremia for use within a windows operating system. You can find the original DOS based version by Geremia here
DeViLs360 has written a thorough tutorial using the DOS based version of DVDKey here, and should be updating shortly to include DVDKey32. The tutorial includes the creation of the RS232 Serial cable to connect to the drive, getting the key from the lite-on and spoofing it to work with another drive.
Download: here
Nice job ;-)
This will bring a hardware/software mod closer.
hhhhhhhhhhhhhmmmmmmmmm!!!
thats a good news!
When is the new xbox 360 jasper chipset gonna release???
I’ve just gone through the process and it is a load of bollocks, there is no current tutorial for this program so it is not yet usable, unless you can figure it out for yourself using the old tutorial which includes modifying your Connectivity kit AND the liteon drive, AND making a Serial cable adaptor to the connectivity kit etc etc, then trying to find out how to add 0×0A to your SATA port ie DFA0 … and trying to find out what the hell your Command Base and Control Base numbers are… OMG!! Sounds good but in theory theres alot more work to be done so dont get too excited now.
Yes, basically tells you all that. There is a link in the 8th paragraph that shows you all what you are in for, so you should be forewarned when you look at the steps.
You are Officialy BANNED!!!
I believe it is the same setup as a dishnet box you need 12v and a three way switch to write back to the chip.
Greetings
Richie
No one has confirmed you can WRITE to the chip, in fact they all say you cannot. There is no visible flash either, just the ROM.