June 23, 2008A “PC” Style Case For The XB360 Mainboard
Posted by The Ori
The Details:
XB01 was first shown at the 2008 CES show in USA, and this concept got a lot of feedback and user suggestions. At the 2008 Computex in Taipei, the final vision of the PC-XB01 Xbox 360 modding case was ready for shipping.
Not only does it work silently and with better cooling, it is all aluminum, in metallic finishing.
Rounded edge, in brushed aluminum with anodized finishing, it can be place up-right or flat-down on the table top. The high quality finishing will fit in most user’s living environments.
XB01 will help Xbox 360 to have better cooling performance, and running silently. User don’t need to worry about overheating problems anymore.
Some Features:
* There is a 120mm exhaust fan at the rear of the XB01 to replace the original two 70mm cooling fans. The 120mm fan can move the heat faster at lower speed, and with less noise.
* XB01 has a 12cm fan, with high airflow but it only needs to run at 1500RPM to cool down the Xbox 360 effectively.
* The Xbox 360 DVD-drive has been relocated to the side, allowing maximum opening for the graphics chipset heatsink and it will also allow users to change the heatsink.
* There are sound insulation foam sheets around the DVD drive to reduce the noise.
* Huge aluminum airduct that covers the Xbox 360 heatsinks, the cold air will pass through the cooler to remove the heat.
* There are water tube openings at the rear of the case, allowing users to upgrade their Xbox 360 to liquid cooling solutions.
* The XB01 includes two fan converters for the different versions of the Xbox 360.
* There are aluminum flippers to cover and protect the front connectors.
See more at: http://lian-li.com.tw
yo i need something like that for my xbox 360 so you dont have to worry about it messing up everytime i turn on my xbox 360 i pray to god i dont get the 3 red lights of death thats a good looking pc style aluminum xbox 360 case plus better fans too nice!!!
Now there’s a case. Might as well order one of these and buy a new xbox and void the warranty moving it over. End solution to heating. Still this has to be the first time you have a console that has to be moved over to a new casing to save itself. But that’s Microsoft’s fault for not doing there testing on the system. I.E. Hard drives and other devices come with packaging that says they’ve been run or worked for x amount of hours to ensure quality. If Microsoft had done that then they might have noticed the device needs more cooling as it would of had some burn outs in testing.
where can we order one ? I WANT ONE NOW
http://lian-li.com/v2/en/product/product06.php?pr_index=261&cl_index=1&sc_index=35&ss_index=87
Right here. Or go to Lian-Li’s website and search XB01. Its due at the end of august.