December 3, 2005Use Any Headset with Xbox360 Live Adaptor
Posted by greg
GamersReport have performed a simple mod allowing you to use any headset with the Xbox360 Live adaptor.
Quote below:
Many of you have been complaining that the headset that comes with the Xbox360 is inferior to all other headsets out there. You can plug any new headset into the Xbox360 jack, but you will loose mute and volume functionality. Well we are here to tell you how to fix that with a simple mod.
All headsets have four wires, two for the mic and 2 for the speaker. The bare and the white wire are for the mic usually, and the blue and the red are for the speaker. Now, any headset you want to use should show these wires when you strip off the jack at the end. Once you figure out which is which, unscrew the Xbox360 Live headset adapter using the 2 screws on the back. You should see something similar to the diagram below.
After this, it is simply a matter of un-soldering the wires from the original Xbox360 headset, threading the new headset wires through the plastic peice in the XBox360 headset adapter, and soldering them into place where the original wires you removed were. Pretty simple, and now you can use any headset at all with the XBox360.







wohhooo 1st post!
Congratulations…
If you are attempting to use a headset that has 3 wires and not 4, is it possible to solder these and have it still control volume?